Alera-lighting APCS OS Bedienungsanleitung PDF herunterladen (Seite 4)

Page 4/5 Rev. 07/16/13 H72-00436 INTEGRATED CONTROLS / A+CLASS

™

APCS OS TID

A+CLASS

™

OCCupAnCy SenSOr

Technical Installation Data

without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.aleralighting.com

US Patent #8,436,542

Fig. P Fig. Q

timer test moDe (8 seconDs)

1. Open the Occupancy Sensor’s retainer ring (See Figures P and Q).

RECOMMENDATION: Leave sensitivity

settings as shipped.

Factory settings rarely need to be

changed. In the unlikey event it is

necessary to change a setting, the

following instructions can be used.

sensor ADjUstments FActory setting

Fig. O

Red Knob: Infrared Sensitivity – 75% default

Green Knob: Ultrasonic Range – 50% default

Black Knob: Timer – 8 min. default

Recommendation: Leave sensitivity settings as shipped.

Fig. R

2. Rotate the black timer adjustment knob clockwise all the way (12 o’clock) (See Figure R), then turn counterclockwise all the way (as seen in

gure O).

3. The timer will remain in the 8 second test mode for 1 hour, then automatically reset to 8 minutes.

4. To manually take the timer out of the 8 second test mode, turn the timer adjustment approximately ⁄



" (1.6 mm) clockwise to make the

setting slightly above minimum (just above the 8 minute setting).

1 2 3 4 5

Keine Kommentare

Alera-lighting APCS OS Bedienungsanleitung Seite 4